Available Specification
Kennametal cutter:
0.44" (11mm) shank: CM42
0.55" (14mm) shank: CM61
0.74” (19mm) shank: C21, C23, C21HD, C24
0.76” (19mm) shank: RL11, RL06, RL10, RL07, RL09. RL08, RS18, RS20, C3KBF
0.78” (20mm) shank: RP21
0.86” (22mm) shank: SM series (SM06, SM02, SM01), SL series (SL02, SL04), Flat cutter system AR150 87
1” (25mm) shank: C32, C31, C31HD, U40HD, AUC40KH, C31FSRHD
TS step shank: TS8
Betek teeth:
0.76” (19mm) shank: BSK12, BSK17, BSK23
1” (25mm) shank: BTK03, BTK10, BTK26
Contact us for more specification. We can also customize upon request.
Our Expertise
1.Selected tungsten carbide tips ensure best cutting performance.
2.Hard & tough steel body.
3.Assured high brazing strength.
4.Rigorous quality control system is performed for consistent quality.
-
- DFKSS201 Conical cutter rock drill tooth
- (Equivalent to TS8)
Step shank ø = 38/30 mm
For drilling in extremely hard cutting conditions
-
- DFKR2501 Carbide tipped tool picks
- (Equivalent to C32)
Bit shank ø = 25 mm
For drilling in most soils or laminated rock conditions
-
- DFKR2502 Rock tooth cutter rotary picks
- (Equivalent to C31)
Bit shank ø = 25 mm
For drilling in soft to hard rock and concrete conditions
-
- DFKR2503 Rock auger bits cutter picks
- (Equivalent to C31HD)
Bit shank ø = 25 mm
For drilling in extremely hard rock and concrete conditions
-
- DFKR2504 Auger parts drill bits rig picks
- (Equivalent to U40HD)
Bit shank ø = 25 mm
For drilling in extremely hard rock and concrete conditions
-
- DFKR2505 Rotary drilling bits cutting picks
- (Equivalent to AUC40KH)
Bit shank ø = 25 mm
For drilling in soft to medium-hard conditions
-
- DFBR2501 Rock drill cutter tools bullet picks
- (Equivalent to BTK10)
Bit shank ø = 25 mm
-
- DFBR2502 Tungsten carbide picks
- (Equivalent to BTK26)
Bit shank ø = 25 mm
-
- DFKR2201 Rock drill teeth excavator picks
- (Equivalent to SM06)
Bit shank ø = 22 mm
For drilling in hard rock or concrete conditions
-
- DFKR2202 Drilling rig spare parts conical picks
- (Equivalent to SM02)
Bit shank ø = 22 mm
For drilling in asphalt or abrasive conditions
-
- DFKR2203 Auger drill rotary teeth
- (Equivalent to SL02)
Bit shank ø = 22 mm
For drilling in asphalt or abrasive conditions
-
- DFKR2204 Rock auger drill conical bits
- (Equivalent to SL04)
Bit shank ø = 22 mm
For drilling in hard rock or concrete conditions
-
- DFKA2201 Tungsten carbide cutting teeth
- (Equivalent to AR150 87)
Bit shank ø = 22 mm, non-rotating
Can go with block C87B
For asphalt and soft to medium-hard abrasive conditions
-
- DFKR2001 Conical pick tools excavator drill bits
- (Equivalent to RP21)
Bit shank ø = 20 mm
For drilling in high impact and abrasive conditions
-
- DFKR1901 Foundation drilling bullet teeth
- (Equivalent to C21)
Bit shank ø = 19 mm
For drilling in soft to medium-hard conditions
-
- DFKR1902 Tungsten carbide drilling bits
- (Equivalent to C23)
Bit shank φ = 19 mm
For drilling in soft to medium-hard rock with abrasive conditions
-
- DFKR1903 Rock tools conical drill bits
- (Equivalent to C21HD)
Bit shank ø = 19 mm
For drilling in extremely hard rock and concrete conditions
-
- DFKR1904 Rock drilling tools auger teeth
- (Equivalent to RL07)
Bit shank ø = 19 mm
For drilling in rock and concrete conditions
-
- DFKR1905 Tungsten carbide teeth
- (Equivalent to RL09)
Bit shank ø = 19 mm
For drilling in abrasive conditions
-
- DFKR1906 Tungsten carbide teeth auger bits
- (Equivalent to RL08)
Bit shank ø = 19 mm
For drilling in abrasive conditions
-
- DFKR1907 Tungsten carbide cutter teeth
- (Equivalent to RS20)
Bit shank ø = 19 mm (0.76”)
For drilling in hard rock and concrete conditions
-
- DFBR1901 Tungsten carbide bullet teeth
- (Equivalent to BSK12)
Bit shank ø = 19 mm
-
- DFBR1902 Rotary cutter bits bullet tooth
- (Equivalent to BSK17)
Bit shank ø = 19 mm
-
- DFBR1903 Rock auger drill rotary teeth
- (Equivalent to BSK23)
Bit shank ø = 19 mm
E-mail:trade@sunnyoem.com
