Available Specification
Kennametal tools trenching teeth:
0.44" (11mm) shank: CM42
0.55" (14mm) shank: CM61
0.74” (19mm) shank: C21, C23, C21HD
0.76” (19mm) shank: RL series RL08, RL10, RL09. RL11, RL04, RL07, RL06
RS series RS14, RS18, RS16. RS01, RS19
0.78” (20mm) shank: RP series RP15, RP22, RP21
0.86” (22mm) shank: SM series (SM01, SM03, SM06, SM02, SM04, SM07)
SL series (SL06, SL07, SL09, SL02, SL04)
Flat cutter system AR150 87, SD series
1” (25mm) shank: C31, C32, U40HD, C31HD, AUC40KH, C31FSRHD
TS step shank: TS8, TS11, TS19, TS32, TS31, TS5
Betek trencher teeth:
0.76” (19mm) shank: BSK12, BSK17, BSK23
1” (25mm) shank: BTK03, BTK10, BTK26
Contact us for more specification. We can also customize upon request.
Our Expertise
1.Selected tungsten carbide tips ensure best cutting performance.
2.Hard & tough steel body.
3.Assured high brazing strength.
4.Rigorous quality control system is performed for consistent quality.
-
- T3KR1901 Trenching tools round shank bits
- (Equivalent to C21)
Bit shank ø = 19 mm
For soft to medium-hard conditions
-
- T3KR1902 Trencher cutter picks
- (Equivalent to C23)
Bit shank ø = 19 mm
For soft to medium-hard rock and asphalt conditions
-
- T3KR1903 Rock chisel tool trenching picks
- (Equivalent to C21HD)
Bit shank ø = 19 mm
For extremely hard rock and concrete conditions
-
- T2KR1901 Bullet tools rig picks rock drill bits
- (Equivalent to RL07)
Bit shank ø = 19 mm
For hard rock and concrete conditions
-
- T2KR1902 Trenching tools excavator picks
- (Equivalent to RL09)
Bit shank ø = 19 mm
For soft to medium or abrasive cutting conditions
-
- T2KR1903 Trench parts earth auger drill bits
- (Equivalent to RL08)
Bit shank φ = 19 mm
For soft to medium or abrasive cutting conditions
-
- T1KR2201 Trench drill cutter conical bits
- (Equivalent to SM02)
Bit shank ø = 22 mm
For soft to medium or abrasive conditions
-
- T1KR2202 Rotary shank bits trenching teeth
- (Equivalent to SL04)
Bit shank φ = 22 mm
For solid rock or concrete conditions
-
- DFKA2201 Trench cutter bits
- (Equivalent to AR150 87)
Bit shank ø = 22 mm, non-rotating
Goes with block C87B
For soft to medium-hard conditions
-
- T7KR2501 Rotary shank trench cutter teeth
- (Equivalent to C32)
Bit shank ø = 25 mm
For soft to medium cutting conditions
-
- T7KR2502 Trenching drill bullet bits
- (Equivalent to C31)
Bit shank ø = 25 mm
For soft to hard rock and concrete conditions
-
- T7KR2503 Tungsten carbide cutting bits rock picks
- (Equivalent to C31HD)
Bit shank ø = 25 mm
For hard rock and concrete conditions
-
- T7KR2504 Conical cutter bullet picks
- (Equivalent to U40HD)
Bit shank ø = 25 mm
For hard rock and concrete conditions
-
- T7KR2505 Conical tools trench cutting tooth
- (Equivalent to AUC40KH)
Bit shank ø = 25 mm
For soft to medium-hard abrasive conditions
-
- T9KSS201 Construction step shank picks
- (Equivalent to TS8)
Step shank ø = 38/30 mm
For extremely hard rock cutting conditions
-
- T9KSS202 Trench drill rock cutting tools
- (Equivalent to TS11)
Step shank ø = 38/30 mm
For the most extreme hard rock and concrete cutting conditions
-
- T9KSS203 Trench cutter drill picks
- (Equivalent to TS19)
Step shank ø = 38/30 mm
For abrasive or soft to medium-impact cutting conditions
-
- T9KSS204 Step shank rock auger drill teeth
- (Equivalent to TS32)
Step shank ø = 38/30 mm
For medium to hard rock and abrasive conditions
-
- T9KSS205 Rotary drilling tools trenching bits
- (Equivalent to TS31)
Step shank ø = 38/30 mm
For medium rock and abrasive conditions
-
- T9KSS206 Step shank cutter tools
- (Equivalent to TS5)
Step shank ø = 38/30 mm
For extremely hard rock and concrete cutting conditions
E-mail:trade@sunnyoem.com
